English 
T: +86-17717097520
E: sales1@melko2015.com
E: sales1@melko2015.com
No.222 Xiangche Rd. Chedun Town Songjiang Dist. Shanghai China 201611
 |
| Quantity: | |
|---|---|
The Light Grooved Surface Melt Blown Filter Cartridge is a cost-effective solution for residential and light commercial water filtration. It has a lightly grooved surface that strikes a nice balance between performance and affordability, making it a popular choice for removing sediment in household water systems.
Cost-Effective: Factory price
Good Dirt Capacity: Light grooves enhance surface area without compromising flow.
Easy Installation: Works with standard filter housings.
Safe Material: Made from food-grade polypropylene.
Material | 100% Polypropylene |
Filtration Accuracy | 1–50μm |
Length | 10″ to 40″ |
Diameter | 2.5″ or 4.5″ |
Operating Temperature | ≤ 60°C |
Max Pressure | 0.4 MPa |
End Cap | PP, plain/threaded |
NSF/ANSI 42 certified |
A versatile choice for residential and agricultural use. It protects household appliances and irrigation systems from sand and silt. Often used in whole-house pre-filters and under-sink units where you want a good balance of value and performance.
Turn off the water supply and let the pressure out of the housing.
Unscrew the sump and remove the old cartridge.
Clean the inside of the housing with clean water.
Insert the new melt blown cartridge and put the housing back together.
Slowly turn the water back on and check for leaks.
Flush the cartridge for 5 minutes before using the water.
Q: How often should I replace the melt blown cartridge?
A: Typically every 3–6 months, depending on water quality and usage. A noticeable drop in water pressure indicates it's time for replacement.
Q: Can this cartridge be used with hot water?
A: No, it is designed for cold water applications only. Maximum operating temperature is 60°C.
Q: Does it remove chemicals or bacteria?
A: No, it is designed for sediment removal only. For chemical or microbial removal, use with activated carbon or UV systems.
